Then press [Enter] to save the setting and continue. Use of an extension cord could cause a fire or electrical shock. One-Touch keys Dials a pre-registered fax or phone number. I want you to pass the PCL twain for testing too. Getting started 4 After loading paper on the bypass tray, you need to set the correct paper size by pressing [Bypass]. Click [OK] and close the printing preferences. It will take a few seconds for the machine to warm up.
|Date Added:||16 December 2013|
|File Size:||11.97 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Getting started After loading paper in the paper cassette, you need to set the paper size. The power outlet should be installed near the machine 190 should be easily accessible so that the power plug can easily be pulled out if an emergency occurs.
You can enter three different names. Then enter the correct digit. Activating your device option s If your machine has device options, you must open scanenr printing preferences and activate them. To activate the device option s: Windows 98 and Windows NT 4. It shows messages and selections, and prompts during operation.
The markings are international standards: Use of an unshielded cable may result in radio interference. In default setting, these keys are programmed to turn the following functions on or off: To clear the memory: When the “User Account Control” dialogue box appears, click [Allow] to allow the driver software installation. After, you load 910f different size of paper on the bypass tray, you need to set the correct paper size by pressing [Bypass].
Do not use envelopes with double flaps or pressure seals as these scannerr not feed properly.
KONICA MINOLTA 131f/190f PCL Printer/Scanner Driver 1.0.0
LCD Liquid crystal display Shows messages and selections, and prompts during operation. Chooses the zoom ratio. Maybe you could give it a shot and let me know first: Selects the paper you want to use.
Loading the document on the document glass 1 Make sure there is no documents in the ADF. Windows USB port” on page Use of a damaged power cord exposed core wire, broken wire, etc. Layout and installation 10 Click [Next] to start installing on your computer.
Repeat the same procedures from steps 3 to 6 three more times until the installation is completely finished. Attach the paper size sticker supplied with your machine on the cassette’s front.
Failure to do so may shorten the service life of the product, cause damage to it or decrease its performance. For Windows Vista users 2 Note Make sure that you followed the installation steps 1 to 11 described on “Local install: Dust that accumulates between the plug terminals may cause a fire.
Getting started 4 After loading paper on the bypass tray, you need to set the correct paper size by pressing [Bypass]. Originally Posted by acusso To change the Energy save mode setting: If the “Windows Logo testing” dialogue box appear, click [Continue Anyway] to install the driver.
A black circle indicates an imperative course of action. The scanner unit will move to home position and the machine is ready to use.
Downloads – Konica Minolta f – KONICA MINOLTA Europe
In other words, do not just add sheets to an already-loaded stack. Press [Enter] to save the setting and continue. Care of Machine Supplies Use the following precautions scannee handling the machine supplies toner, paper, etc.