Measure one panel width in from the roof edge.
How to lay apro panel roofing.
The total price for labor and materials per square foot is 11 19 coming in between 9 59 to 12 79.
Be sure the larger edge is laid so that the small edge of the next panel will overlap it.
50 yr limited warranty.
Cut the panels to the desired length.
Fasten using panel wood screws.
Use a scaffold for easy access to the roof.
Do not stand on the roof panel until the panels have been attached.
Add the metal panels.
6 transition trim place trim over outside closure.
Contact building regulators to determine the requirements for.
At this point chalk a line from ridge to eave.
Pre drill holes on the ridges.
Most panels come up to 32 feet 9 8 m in length.
Align the first metal roofing panel so that it overlaps the edging by 1 2 to 3 4 of an inch and is square to the roof.
Double embossed 26 gauge galvalume coated steel shingles.
If yours do not then you will need to drill holes.
Allow for a minimum of 18.
The roof panels will not withstand the weight of a person standing at the edge of the panel.
Take measurements from the roof peak to the eave for custom cut premium pro snap panels.
Pro panel ii install guide.
9 roofing panel install with lower edge 1 above the transition bend.
Take your first sheet of metal and place it on the roof so that it overhangs the edge at least 3 4 in 1 9 cm.
Quantity includes typical waste overage material for repair and local delivery.
Place the first screw.
Place the leading edge of the first panel along this line.
A typical 2000 square foot project costs 22 382.
Some panels have pre drilled holes.
Installing corrugated roofing 1.
Measure the roof with a.
Install the roofing screws vertically along each rib in the panel.
8 inside closure install along the length of the transition trim about 2 above the bend.
How to install premium pro snap roofing step 1.
Always begin working at the point with the longest peak to eave distance.
Panel roofing installation labor basic basic labor to install panel roofing with favorable site.
It is extremely important that this panel be laid square to the eave and ridge so that the remaining panels will line up square on the roof frame.
The national average cost to install panel roofing is 6 13 per square foot with a range between 5 05 to 7 21.
Panel roof cost non discounted retail pricing for.