Power wash afterwards sand remaining areas prime using a high quality bonding primer.
How to paint cedar shake siding.
Do prime the exposed wood whether new or previously painted with oil primer.
Scrape any peeling paint chips off the shakes with a scraper.
Prime the cedar before you paint it.
We like to use sherwin williams or porter oil primers.
Exterior grade acrylic latex paint is the most dependable finish in.
Tips for painting cedar siding choose the correct type of paint for the cedar.
Use a large cardboard box to create a m akeshift spray booth for your paint gun.
It is strongly recommended that you go with the two coat system for protecting your.
Once done let the wood dry completely for approximately two weeks.
Survey the entire area of your house especially the lower levels where the shingles will more likely retain water.
How to do it.
All done by hand to ensure full coverage.
The only way to block the tannins in the cedar siding is to.
Best way to paint cedar shake siding scraping peeling paint.
You must be careful.
Brush the paint rather.
Do not however use a power washer because cedar can t withstand the pressure.
A step by step guide to walk you through the pro.
Powerwash the siding to remove any excess dirt or paint with a low pressure pressure washer.
See how the pros sand prep prime and paint a cedar shingle home.
Do not allow peeling paint to remain on the cedar siding before painting.
Choose a paint and primer.
Rinse and let dry.
Water borne primers cannot block the tannins in the cedar.
Apply the wood cleaner to the cedar siding using a paint brush or roller.
Apply primer and paint.
Remove as much of the old paint as possible as.
How to prepare old cedar shakes for repainting step 1.
Do not use water borne primers over exposed cedar siding.
Using a stiff bristled brush scrub the siding.
What that means is that you can put primer on the cedar siding but brown stains will come through.
The trick is to keep the paint from getting all over the place in the process.