Center nails in slots to permit expansion and contraction of the siding.
How to put a nail in vinyl siding.
Start nailing vertical siding and trim pieces in the top of the uppermost slots to hold them in position.
Gap between the nailhead and the vinyl to allow easy movement.
The build up of old caulking interferes with the positioning of new.
Remove downspouts lighting fixtures and mouldings.
Install trim under eaves rakes.
I was super worried about committing to nail holes or breaking the wall until i found the perfect hooks for hanging decor on vinyl siding without nails or screws.
Galvanized roofing nails for your vinyl siding unless the sheathing has foam on it.
Vinyl siding must be attached loosely.
Nail in the center of the starter strip nailing slots.
Then you ll want longer ones.
For insulated siding the.
Our screened in porch has a wall of vinyl siding and i wanted to make it look nicer by adding some pretty decor.
Renail right next to the old nail leaving at least a 1 16 in.
At the bottoms of windows install under sill trim for horizontal siding and j channel trim for vertical siding.
Scrape away old caulking around windows and doors.
But i had no idea how to hang things on vinyl siding without damaging it.
Don t drive the nails tight.
Have the necessary tools for this diy project lined up before you start you ll save time and frustration.
Each panel should be able to move back and forth or the siding will bubble on really hot days.
Surface preparation for vinyl siding installation securely nail all loose boards and wood trim and replace any rotted boards.
Drive nails straight and level to prevent distortion and buckling of panel.
Keep the ends of starter strips at least 1 4 6 4mm apart to allow for expansion fig.
Using the chalkline as a guide install the top edge of the starter strip along the chalkline nailing at 10 254mm.
Find the tight nails and cut them photo 4.