Mix up two part automotive filler.
How to repair rotted wood roof.
Fill the void with the filler.
Roof repairs typically involve replacing damaged shingles and rusted flashing but the overhang of a roof is often the first area to succumb to rot peeling paint and other weather related problems.
Pry up shingles around the damaged area.
Once the wood is dry you can apply a wood preservative that contains copper or borate such as woodlife copper.
Remove the rotten wood.
You ll first have to dry the wood by repairing leaks and or running a dehumidifier.
Patching the area with epoxy.
Measure the length of framing wood needed with a measuring tape.
You can mold and shape it to match the original.
Use a claw hammer to dig out loose rot.
Change a rotten or damaged fascia board.
It was very easy.
Each shingle is typically secured by eight nails.
You can install a new fascia board in a couple of hours with the right tools to d.
Hold the replacement against the end of the remaining rafter.
Pull the old rafter end away from the roof eave.
How to replace rotted wood rafters.
Using a nail puller and power screwdriver remove the roofing nails and screws.
Claw out rotted wood out with a hammer.
If the entire rafter was rotten use the.
Making a wood.
The good news is unlike most roof repairs you can fix an eave or gable overhang rake without climbing onto the roof.
If you re only replacing the portion of the roof with damage you need to find out the.
How to repair rotted wood rebuild and restore rotted wood without replacing it.
How to fix rotten wood on a roof locate dry rot roof damage.
Remove rotted board pull the shingles and underlying felt off the entire board not just the area that s rotted.
Dig out any rotten wood.
Use a polyester filler to rebuild rotted or damaged wood.
The rotten wood will come away easily.
This is where your wooden dowels will insert into the wood.
Removing the rotted area.
As the filler starts to cure shape it to conform to the molding.
Sorry the video player failed to load.
Use a wide paintbrush to apply a thin.
Discard the wood in a garbage bin as you work to.
Paint the wood with a bonding agent.