1 slide putty knife under roof shingles that are stuck down.
How to seal shingles onto gutter protector.
Some covers snap onto the troughs and others are attached using special fasteners.
Ct1 sealant is a hybrid polymer that has no solvent in it is v o c free plus it is guaranteed never shrink or crack.
Some liquid sealant products come with the possibility to spray them onto the surface making it easier and faster but less likely to get a very thorough coat on the first attempt.
A waterproof sealing product such as ge clear gutter caulk available on amazon is easy to use.
When water sits on a shingle like its doing here it can work its way under the shingles at every seam.
2 insert gutter protector underneath the shingles making sure it covers the front edge of gutter.
Another down side to using ordinary silicone sealant is you can t apply it onto wet surfaces.
Most products come in 4 to 6 ft 1 2 to 1 8 m sections.
It can cause your roof felt and your wood sub roof to sustain water damage.
Slide the back edge of the guard section under the shingles.
Make sure that the coat is as thorough as possible.
Place a silicone bead below the warped or bent part of the shingle and then bend it back into place and then weigh it down until the silicone dries.
Leave the sealant to dry for a couple of hours and then apply a second coat for extra durability.
4 if nails or screws are used cover each with a dab of roofing cement.
3 fasten gutter protector to the roof and or gutter as specified by the manufacturer.
C tec has a product called ct1 sealant it s a unique sealant and construction adhesive all in one product and is perfect for sealing gutters.
Align the guard section with the roofline then insert it under the shingles you ve lifted.
Either of these two methods is enough to keep your gutter guards firmly attached so you don t have to nail them onto the roof.
Roof shingle warranties may be impacted if a gutter guard is installed in this manner.
Simply squeeze into cracks and holes then apply a further coating around the entire gutter joint.
Continue to lift shingles and slide in the gutter guard until you ve reached the end of the first guard section.