If you have a meter the amount you pay will depend on how much water you have used.
Water meter readings explained.
A water meter is an instrument that monitors water consumption at homes and businesses.
They are most often housed in concrete boxes underground with heavy steel covers that are bolted shut and labelled water for ease of identification.
A water meter is a device that measures how much water you use.
The display alternates between the meter read and the flow rate.
Your water meter readings explained.
Almost no utility bills water to the actual gallon.
On larger meters there could be two or more printed zeros represented by the sweep hand.
Locate your water meter.
Your meter will look something like the photo below with the black and white digits recording full units and red digits recording down as low as a single litre.
In an apartment or condominium the water meters will likely be located in a utility room in the basement or at.
You may also have other rates or readings on the meter which could be the live usage or the total usage.
If your water meter is inside it s easy but you may need a torch.
We re required to take our own meter readings at each property at least once every two years.
Then send us the up to.
Residential water meters can ordinarily be found at the front of the property near the curb or street.
You ll see some white numbers on black these are cubic metres this is your meter reading.
If you d like to provide a meter reading to ensure your bill is as accurate.
This makes sure there are no leaks from your water pipes and that we re not overcharging you.
The red numbers are not needed they are just for us.
So make a note of the reading and the date you re taking it.
If you have a standard water meter we ll aim to read your meter every six months.
Most modern water meters have a similar layout recording in cubic metres m equivalent to 1 000 litres of water or approximately 220 gallons.
If we estimate your bill it can sometimes be higher or lower than your actual water usage particularly if you ve recently had a meter fitted and there s no.
Why 80 and not 90 is explained in the next step.
Although we try to read meters and send bills based on an actual reading sometimes it s not possible because the meter s fitted inside your property or behind locked gates.
The rate number and it s correlation to day or night depends on how the meter was set up.
The readings may be labelled as rate 1 r1 and rate 2 r2.
Similar to a gas meter water meters record a property s water usage for billing purposes most residential properties will have a water meter installed that measures water usage in kilolitres kl or cubic metres m 3 with 1kl and 1m 3 equal to 1 000 litres.
For example rate 1 could mean day for one meter but night for another.
If they bill to 10 gallon increments they would read only the moving white and black wheels for a reading of 53580.
It is similar to your gas or electricity meter.
Your supplier uses readings from the meter to calculate how much to charge you for your water and sewerage services.
Look at the meter.